Fluid - M/T: Service and Repair

NOTE: Replace drain plug (B) washer with a new one whenever removed.




1. Remove the plugs ((A) and (B) with washer).
2. Drain the oil into a suitable container.
3. Wipe all plugs clean.
4. Apply sealant to plug thread (A).
5. Install the drain plug ((B) with new washer).

Tightening torque
(B): 39 - 59 N-m (4.0 - 6.0 m-kg, 29 - 43 ft-lb)




6. Add the specified oil from check plug (A) port until the level reaches the bottom of check plug hole.




7. Install plug (A).

Tightening torque
(A): 25 - 39 N-m (2.5 - 4.0 m-kg, 18 - 29 ft-lb)