Bearing Housing

Disassemble in the order shown in the image, referring to Disassembly Note.




Disassembly note
Reverse idler gear shaft

CAUTION: Support the reverse idler gear shaft with one hand so that it does not fall.

Press the reverse idler gear shaft out of bearing housing.




Mainshaft front bearing

CAUTION: Support the mainshaft front bearing with one hand so that it does not fall.

Remove the mainshaft front bearing with a suitable pipe.




Countershaft center bearing

CAUTION: Support the countershaft center bearing with one hand so that it does not fall.

NOTE: If countershaft center bearing is replaced, replace the spacer also.

Remove the countershaft center bearing with a suitable pipe.