Camber

Fig. 1 Camber Adjusting Bolt Location. 1992 Models:

Fig. 2 Camber Angle Adjustment Provision. 1992 Models:

FRONT

1. Loosen the cam nut on the upper link, Fig. 1.
2. Turn the adjusting cam bolt to provide the correct camber angle as shown in Fig. 2. Turning the adjusting cam bolt one graduation changes the camber angle about 14 minutes.
3. Torque the cam nut ot 69-86 ft. lbs.

REAR

1. Loosen the cam nut on the upper lateral link.
2. Turn the adjusting cam bolt to provide the correct camber angle, Fig. 2. Turning the adjusting cam bolt one graduation changes the camber angle about 11 minutes.
3. Torque the cam nut to 69-86 ft. lbs.
4. Adjust the toe-in as indicated.