Caster

Fig. 1 Camber Adjusting Bolt Location. 1992 Models:

Fig. 2 Camber Angle Adjustment Provision. 1992 Models:

Adjust front caster before adjusting front camber.
1. Raise and support vehicle.
2. Loosen the front and/or rear cam nut, Fig. 1.
3. Turn the front and/or rear adjusting cam bolt as directed in Fig. 2. to obtain correct caster angle. Turning the front cam one graduation on the scale changes the caster angle about 1/3 of an inch and the camber about 5/12 of an inch. Turning the rear cam one graduation changes the caster angle about 1/3 of an inch and the camber about 1/30 of an inch.
4. Adjust front camber, then front toe-in.