Toe-In

Fig. 5 Rear Toe-in Adjustment Procedure:

FRONT

1. Loosen left and right tie rod locknuts.
2. Turn both tie rods the same amount until specified adjustment is obtained. Both tie rods have righthand threads.
3. Torque tie rod locknut to 25-29 ft. lbs.
4. If boot is twisted, loosen boot band and straighten.

REAR

Adjust rear toe-in before adjusting rear camber.
1. Loosen front and/or rear cam nut on rear arm.
2. Adjust cam nuts as shown in Fig. 5, until proper specifications have been obtained. Turning front cam one graduation changes toe-in about .11 of an inch. Turning the rear cam one graduation changes the camber about .11 of an inch.
3. Adjust camber.