With Drum Brakes

Fig. 1 Rear Axle Replacement:

Note: Remove and install in the order indicated in the table.

REMOVAL

Brake Pipe

Caution: After disconnecting the brake pipe, plug it to avoid fluid leakage.





1. Disconnect the brake pipe with the SST.

DISASSEMBLY

Hub Bolt









Caution: Do not remove the hub bolts if not necessary.
Do not reuse the hub bolts if removed.

1. Remove the hub bolts with a press.

ASSEMBLY

Hub Bolt





1. Press in new hub bolts.

INSTALLATION

Brake Pipe





1. Tighten the brake pipe with the SST.

Tightening torque: 13-22 Nm (1.3-2.2 m-kg, 9.4-16 ft-lb)

Locknut





1. Install a new locknut and stake it, as shown.

Tightening torque: 177-235 Nm (18-24 m-kg, 130-174 ft-lb)






After installation, bleed the brake system, adjust the parking brake lever stroke and check the rear alignment.