Front Crankshaft Seal: Service and Repair

Fig. 74 Timing Belt Replacement:

Fig. 75 Timing Belt Replacement:

Fig. 76 Timing Belt Replacement:

Fig. 77 Timing Mark Alignment:

1. Remove timing belt as outlined under Timing Belt, Replace.
2. Using holding fixture tool No. 49-S120-710 and lock tool No. 49-B011-102, or equivalents, remove timing belt pulley lock bolt.
3. Using suitable puller, remove timing belt pulley, then woodruff key.
4. Cut oil seal lip with knife, then remove seal.
5. Reverse procedure to install. Install oil seal until flush with edge of oil pump body.