Door Grip - Cracked

Bulletin No.: 005/94
Issued: 1/27/94
Revised: 2/17/94

Category: S

Applicable Model/s
1992-93 929

Subject
CRACKED DOOR GRIP - FRONT AND REAR

The revised portion of this bulletin is indicated by an asterisk (*). Replace the original bulletin with this revised copy.





APPLICABLE MODELS/VINS

DESCRIPTION
On some vehicles, the door grip(s), which is part of the switch panel, may exhibit cracking. This condition is due to weak material on the door grip(s) which cracks under the pulling force when closing the door(s). Any of the four (4) doors may exhibit this condition.





REPAIR PROCEDURE
If this condition exists, replace the affected switch panel(s) with the part listed under Parts Information. This part has been modified to reduce the possibility of cracking. Removal and installation of the switch panel are outlined in section S of the applicable workshop manual. When removing the door grip from the switch panel (all doors), be sure not to break the copper strip. This copper strip provides the static electricity drain feature on the 929.





PARTS INFORMATION

WARRANTY INFORMATION:
(Applies To Vehicles Covered Under Normal Warranty)
Warranty Type: A
Customer Comment Code: 92
Damage Code: 9A
Part Number Main Cause: See Parts Information
Operation Number: XX0555R1 (one side front)
XX0555R2 (both sides front)
XX0555R3 (one side rear)
XX0555R4 (both sides rear)
XX0555R5 (all)
Labor Hours: 0.5 Hrs. (one side, front or rear)
0.8 Hrs. (both sides, front or rear)
1.4 Hrs. (all)