Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1993 >> MX-3 L4-1597cc 1.6L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Brakes and Traction Control >> Wheel Speed Sensor >> Service and Repair >> Rear Wheel Speed Sensor Rotor

Rear Wheel Speed Sensor Rotor

1. Raise and support vehicle, then remove rear wheel hub assembly.
2. Tap ABS sensor rotor from hub using a chisel. Do not reuse old sensor rotor.
3. Reverse procedure to install noting the following:
a. Install new sensor rotor onto wheel hub, press rotor on until it is flush with wheel hub using bearing installer tool No. 49 M005 796, or equivalent, Fig. 172.

Fig. 172 Rear Wheel Speed Sensor Rotor Installation:





pro multis · About Operation CHARM