With Manual Steering

Fig. 29 Manual Steering Gear Replacement:

Fig. 30 Manual Steering Gear Bolt Tightening Sequence:

1. Raise and support front of vehicle, then remove wheels.
2. Remove steering gear in numbered sequence, Fig. 29. Remove steering gear from right side of vehicle.
3. Install steering gear reversing numbered sequence, Fig. 29, noting the following:
a. Install steering gear mounting bolts in sequence shown in Fig. 30.
b. Remove intermediate shaft and pinion shaft bolts, then move intermediate shaft upward.
c. Connect intermediate shaft and pinion shaft, then tighten fixing bolt to specifications shown in Fig. 29.