Front

Fig. 20 Stabilizer Bar Replacement:

Fig. 21 Stabilizer Bar Replacement:

1. Raise and support front of vehicle, then remove wheels.
2. Remove undercover.
3. Remove stabilizer bar in numbered sequence shown in Figs. 20 and 21, noting the following:
a. Support engine with engine support bar tool No. 49-G017-5A0, or equivalent.
b. Remove steering gearbox mounting bracket nuts, then the gearbox.
c. Support crossmember with a jack, then remove retaining bolts.
d. Remove stabilizer bracket, then lower crossmember slowly.
e. Remove stabilizer bar from the crossmember.

4. Install stabilizer bar in reverse order of sequence shown in Figs. 20 and 21, noting the following:
a. Attach stabilizer bar to crossmember, then to stabilizer bracket.
b. Tighten all bolts and nuts to specifications shown in Figs. 20 and 21.
c. Tighten stabilizer bracket bolts after lowering vehicle.
d. Bleed air from power steering system as necessary.