Valve Body: Service and Repair

Replacement
1. Disconnect the solenoid connector.
2. Remove the control valve body.
3. Remove the solenoid valve.
4. Apply ATF to a new O-ring and install it, the new solenoid valve, and the oil strainer assembly.

Tightening torque: 7.8 - 11 N.m (80 - 110 kg.cm, 68 - 95 in.lb)

5. Install the control valve body.

CAUTION: Lightly apply silicone sealant to both sides of the oil pan gasket.

6. Install the new gasket and install the oil pan.

Tightening torque: 8.3 - 11 N.m (85 - 110 kg.cm, 74 - 95 in.lb)

7. Connect the solenoid connector.
8. Pour in ATF, and with the engine idling, check the ATF level and check for leaks.
9. Drive the vehicle and check the shift points, shift schedule, and shift shock.