Thermostat: Service and Repair

Caution
Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery.
Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.


1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the image.




1. Radiator hose, upper
2. Water thermoswitch connector
3. Thermostat cover

4. Install in the reverse order of removal.

Steps After installation
1. Fill the radiator with the specified amount and type of engine coolant.
Coolant

2. Connect the negative battery cable.
3. Start the engine and check for leaks.