Toe-In

Adjust rear toe-in before adjusting rear camber.

1. Loosen front and/or rear cam nut on rear arm.
2. Adjust cam nuts until proper specifications have been obtained. Turning front cam one graduation changes toe-in about .11 inch. Turning rear cam one graduation changes camber about .11 inch.
3. Adjust camber.

INCREASE, LEFT WHEEL
Front cam Counterclockwise
Rear cam Counterclockwise

DECREASE, LEFT WHEEL
Front cam Clockwise
Rear cam Clockwise

INCREASE CAMBER, RIGHT WHEEL
Front cam Clockwise
Rear cam Clockwise

DECREASE CAMBER, RIGHT WHEEL
Front cam Counterclockwise
Rear cam Counterclockwise