Camber

Adjust rear toe-in before adjusting rear camber.

1. Raise and support vehicle.
2. Loosen front and rear cam nuts on rear control arm.
3. Adjust cam nuts until proper specifications have been obtained. Turning front cam one graduation changes camber about 1/4 inch. Turning rear cam one graduation changes camber about 1/10 inch.

POSITIVE CAMBER, LEFT WHEEL
Front cam Counterclockwise
Rear cam Clockwise

NEGATIVE CAMBER, LEFT WHEEL
Front cam Clockwise
Rear cam Counterclockwise

POSITIVE CAMBER, RIGHT WHEEL
Front cam Clockwise
Rear cam Counterclockwise

NEGATIVE CAMBER, RIGHT WHEEL
Front cam Counterclockwise
Rear cam Clockwise