Fluid - M/T: Service and Repair

1. Disconnect the speedometer cable and remove the speedometer driven gear.
2. Remove the drain plug and washer. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.

Tightening torque: 40 - 53 N-m (4.0 - 5.5 kgf-m, 29 - 39 ft-lbf)




4. Add the necessary amount of the specified oil through the speedometer driven gear mounting.

Specified oil
Grade: API service GL-4 or GL-5
Viscosity: SAE 75W - 90
Capacity: 2.68 liters (2.83 US qt, 2.36 Imp qt)




5. Verify the oil level.
6. Install the speedometer driven gear and connect the speedometer cable.