Front Hub & Bearing

REMOVAL

Fig. 1 Front Axle & Related Component Replacement:

1. Jack up the front of the vehicle and support it on safety stands.
2. Remove the wheel.

Brake Caliper Assembly
Hang the brake caliper assembly out of the way as shown in the figure.

INSTALLATION

Wheel Hub Nut





1. Install a new hub nut and stake it as shown.

Tightening torque: 177-235 N.m (18.0-24.0 kgf.m, 131-173 ft. lb ft)





2. Measure the wheel bearing play.
After installation, check front wheel alignment.

DISASSEMBLY





ABS Sensor Rotor

Note: The sensor rotor does not need to be removed unless you are replacing it.





Remove the sensor rotor by using a brass bar and a hammer.

Hub Bolt

Note: The hub bolts do not need to be removed unless you are replacing them.





Remove the hub bolts by using a press.

ASSEMBLY

Hub Bolt





Press in new hub bolts

ABS Sensor Rotor





Press on the new sensor rotor by using the SST.