Precaution

1. Clean the transmission exterior thoroughly with a steam cleaner or cleaning solvents before disassembly.
2. Clean the removed parts (except sealed bearings) with cleaning solvent, and dry with compressed air. Clean out all holes and passages with compressed air, and check that there are no obstructions.
3. Wear eye protection when using compressed air.
4. Use a plastic hammer when disassembling the transmission case and other light alloy metal parts.
5. Keep all disassembled parts in a clean area.
6. When using a vise, insert protective plates to prevent damage to the part.
7. Note the assembly position of each part as it is disassembled.
8. Inspect each part for damage while disassembling.