Oil Seal (Extension Housing)

CAUTION: Do not damage the extension housing or mainshaft splines.




1. Remove the transmission cover.
2. Remove the propeller shaft.
3. Remove the oil seal with a screwdriver.




4. Apply the specified oil to the new oil seal.
5. Install the oil seal by using the SST.
6. Install the propeller shaft.
7. Inspect the oil level. Testing and Inspection
8. Install the transmission cover.

Tightening torque: 7.9 - 10.7 N-m (80 - 110 kgf-cm, 70 - 95.4 in-lbf)