Automatic Transaxle

System Diagram (A/T):

GENERAL DESCRIPTION
Vehicle is equipped with a 2.0 liter, 4 cylinder, DOHC gasoline engine, and computer controlled electronic fuel injection system. System maintains an air/fuel mixture as close as possible to the ideal stoichiometric ratio, for all operating conditions. Fuel is supplied to injectors at high pressure by an electric fuel pump in the tank. The computer (Powertrain control module, PCME) monitors various sensors mounted on the engine, including an exhaust gas oxygen sensor, using this information to determine quantity of fuel needed. PCME energizes injectors for varying lengths of time, depending on quantity of fuel required.

COMPONENTS
Primary fuel and intake components are covered in this section. For information regarding electronically controlled devices, the computer, and its functions, refer to Computers and Control Systems.

^ Accelerator pedal and cable
^ Air cleaner, intake air ducts and associated parts
^ Idle air control valve (BAC valve)
^ Fuel tank
^ Fuel pump
^ Fuel pump relay
^ Fuel filter
^ Fuel pressure regulator
^ Fuel rail
^ Fuel hoses
^ Fuel injectors
^ Pulsation damper
^ Resonance chambers
^ Throttle body