Vehicle Speed Sensor: Testing and Inspection
VEHICLE SPEED PULSE GENERATORInspection
1. Refer to Service and Repair for disconnection of the Vehicle Speed Pulse Generator connector.
Measure Resistance Between The Terminals Of The Sensor:
2. Measure resistance between the terminals of the Vehicle Speed Pulse Generator.
Resistance: 253-6O4 Ohms @ (ATF temperature) -40-16O°C (-4O-32O°F)
3. If not correct, replace the Vehicle Speed Pulse Generator.
4. Refer to Service and Repair for connection of the Vehicle Speed Pulse Generator connector.