Component Tests and General Diagnostics

SHIFT-LOCK
1. Turn the ignition switch to ON (engine off).
2. Verify that the selector lever is in P position.
3. Without the brake pedal depressed, verify that the selector lever cannot be shifted from P position.
4. Depress the brake pedal and verify that the selector lever can be shifted from P position.
5. If not as specified, check the P position switch continuity and/or shift-lock actuator terminal voltage and continuity.





EMERGENCY OVERRIDE KEY CYLINDER
1. Turn the ignition switch to OFF.
2. Verify that the selector lever is in P position.
3. Without the brake pedal depressed, verify that the selector lever cannot be shifted from P position.
4. Insert the ignition key into the emergency override key cylinder beside the selector lever, turn the ignition key counterclockwise and hold it. Verify that the selector lever can be shifted from P position.
5. If not as specified, replace the emergency override key cylinder.





KEY INTERLOCK
1. Turn the ignition switch to ON (engine off).
2. Shift the selector lever to R position.
3. Verify that the ignition key cannot be turned to LOCK position.
4. Shift the selector lever to P position and release the selector lever push button.
5. Verify that the ignition key can be turned to LOCK position.
6. If not as specified, inspect and repair as necessary, referring to Testing and Inspection.