Transaxle Solenoid and Sensors Resistance Tests

Transaxle Solenoid and Sensors Resistance Tests Solenoids (EPC, SSI, SS2, TCC, 3-2T/CCS)

1. Set ohmmeter to 100-200 ohm renge.






2.. Connect the position lead of the ohmmeter to the appropriate VPWR jack for the solenoid being tested.
3. Connect the negative lead of the ohmmeter to the appropriate solenoid (EPC, SSi, SS2, TCC, 3-2T/CCS) jack.
4. Record resistance.






5. Refer to chart for valves.
6. If out of range refer to the following pinpoint tests.

^ Pinpoint test E (EPC)
^ Pinpoint test A (SS1, SS2)
^ Pinpoint test C (TCC)
^ Pinpoint test G (3-2T/CCS)