Door Side Molding - Comes Off In Extreme Cold: Overview

Bulletin No.: 001/97
Issued: 02/25/97
Revised:

Category
S

Applicable Model/s
1993 - 97 626

Subject:
DOOR SIDE MOLDING DETACHES IN EXTREMELY COLD TEMPERATURES

APPLICABLE MODELS/VINS
All 1993 - 97 626 model vehicles

DESCRIPTION
The front or rear door side molding may detach from the door skin. This occurs primarily in cold climates (-20 degrees F). The concern is caused by inadequate adhesion of the molding to the door skin at low temperatures. If a customer complains of this concern, replace the molding according to the instructions in this bulletin.





PARTS INFORMATION





WARRANTY INFORMATION
(Applies To Verify Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Information.)





Disclaimer