Spark Plug: Service and Repair
SPARK PLUGRemoval / Installation
CAUTION: Pulling on the wire part of the Spark Plug lead may break it. To remove the lead, pull only on the boot.
1. Remove and install the high-tension leads carefully.
CAUTION: To avoid breaking the spark plug, be sure to fit the socket squarely over it.
2. Remove and install the Spark Plug by using a plug socket.
3. Tighten the Spark Plug to the specified torque.
Tightening Torque: 15-22 Nm (11-16 ft.lb.)