With Automatic Transaxle (ATX)
PREPARATION1. Warm engine to operating temperature.
2. Turn all electrical loads "OFF."
- Headlight switch
- Blower switch
- Rear window defroster
- Air conditioner sensor (A/C switch)
SST-49 B019 9A0:
3. Connect special service tool (SST) #49 B019 9A0 to data link connector.
4. Connect tachometer to data link connector IG- terminal.
ADJUST IDLE SPEED
View: Special Service Tool With Test Switches:
1. Set switch A to position 1.
2. Set test switch to SELF TEST.
3. Verify that coolant fan is not running.
4. Check idle speed:
Idle Speed: (P range) 700 - 800 rpm (ATX)
Idle Speed Adjustment:
5. If not within specification, adjust with air adjusting screw.
6. Disconnect SST.