Brake Light Switch: Testing and Inspection

VOLTAGE INSPECTION
1. Turn the ignition switch ON.

View: Testing The Stoplight Switch:

2. Measure voltage at the stoplight switch connector.
3. If not as specified, check the wiring harness and the continuity of the switch.

CONTINUITY INSPECTION

NOTE: Obtain audio anti-theft access code before disconnecting battery cables.

1. Disconnect the negative battery cable.
2. Disconnect the stoplight switch connection.

View: Testing Stoplight Switch Continuity:

3. Check continuity between terminals A and B of the switch.
4. If not as specified, replace the stoplight switch.
5. Connect the stoplight switch connector.
6. Connect the negative battery cable.