PCME Pin Test

INSPECTION
1. Lift up the floormat in front of the passenger's seat.

SST Engine Signal Monitor-49 9200 162 And Harness Adapter-49 G018 903:

2. Connect the special service tool (SST) (Engine Signal Monitor) between the powertrain control module (engine) (PCME) and the wiring harness using the SST (Adapter) as shown.

SST Sheet Overlay-49 G018 904:

3. Place the SST (Sheet) on the SST (Engine Signal Monitor).
4. Measure the voltage at each terminal.

Refer to Computers and Control Systems/ Powertrain Control module Engine/ Testing and Inspection/ Procedures/ PCME Terminal Voltage Charts.
PCME Terminal Voltage Charts

5. If any powertrain control module (engine) terminal voltage is incorrect, check the input or output device and related wiring.
6. If they are normal, replace the powertrain control module (engine).





CAUTION: Applying voltage to SST terminals A or B will damage the SST.