Neutral Safety Switch: Testing and Inspection

FUNCTIONAL TEST
1. Verify that the starter operates only with the ignition switch at the START position and the selector lever in P or N position.
2. Verify that the back-up lights illuminate when shifted to R position with the ignition switch in the ON position.
3. Check the park/neutral switch if not as specified.

CONTINUITY TEST

NOTE: Obtain audio anti-theft access code before disconnecting battery cables.

1. Disconnect the negative battery cable.
2. Remove the resonance duct and the air cleaner housing assembly.
3. Disconnect the park/neutral switch connector.

View: Test Connections and Readings:

4. Check continuity of the park/neutral switch.
5. If not as specified, replace or adjust the park/neutral switch.
6. Connect the park/neutral switch connector.
7. Install the air cleaner housing assembly and the resonance duct.
8. Connect the negative battery cable.