Oil Seal (Differential)

1. Disconnect the speedometer cable and remove the speedometer driven gear. Service and Repair
2. Remove the drain plug and washer. Drain the oil into a suitable container.
3. Separate the drive shafts from the transaxle.




4. Remove the oil seal by using a screwdriver.




5. Using the SST and a hammer, tap the new oil seal in evenly until the SST contacts the transaxle case.
6. Coat the lip of the oil seal with transaxle oil.
7. Insert the drive shafts into the transaxle.
8. Add the specified amount and type of oil. Service and Repair