Fluid - M/T: Service and Repair

1. Remove plugs (B) (with washer) and (A).
2. Drain the oil into a suitable container.
3. Wipe all plugs clean.
4. Install drain plug (B) (with new washer).

NOTE: Replace drain plug (B) washer with a new one whenever the drain plug is removed.

Tightening torque (B): 40 - 58 N-m (4.0 - 6.0 kgf-m, 29 - 43 ft-lbf)






5. Add the specified oil at check plug (A) port until the level reaches the bottom of check plug hole.

Specified oil:
API service GL-4 or GL-5
All-season: SAE 75W - 90
Above 10 °C (50 °F): SAE 80W - 90
Capacity: 2.0 liters (2.1 US qt, 1.8 Imp qt)






6. Apply sealant to threads of plug (A).
7. Install plug (A).
Tightening torque (A): 25 - 39 N-m (2.5 - 4.0 kgf-m, 19 - 28 ft-lbf)