Timing Belt Removal
Removal1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the image, referring to Removal Notes.
Removal Notes:
Pulley lock bolt:
1. Hold the pulley boss with the SST.
2. Using the SST, loosen the pulley lock bolt.
3. Remove the bolt and the pulley boss.
Timing belt:
1. Install the pulley boss.
2. Install the pulley lock bolt.
3. Turn the crankshaft to align the timing marks.
4. Do not turn the crankshaft after aligning the timing marks.
5. Remove the pulley lock bolt and pulley boss.
6. Mark the timing belt rotation for proper reinstallation.
7. Loosen the tensioner lock bolt and pry the tensioner outward with a bar.
8. Tighten the lock bolt with the tensioner spring fully extended.
9. Remove the timing belt.