Seat Belt - Caution Label Cover
Bulletin No.: 001/94Issued: 1/5/94
Revised
Category
S
Applicable Model/s
1993-94 RX-7 and 1990-94 MX-5
Subject:
SEAT BELT CAUTION LABEL COVER
APPLICABLE MODELS/VINS
RX-7
1993 - All Vehicles
1994 - Vehicles with a VIN of JM1FD333*R0300001 through JM1FD333*R0301350
MX-5 MIATA
1993 - All Vehicles
1994 - Vehicles with a VIN of JM1NA353*R0500001 through JM1NA353*R0506949
NOTE:
The asterisk (*) in the VIN can be any number (0-9) or "X".
DESCRIPTION
If the sleeve covering the seat belt label has dropped, the caution label becomes exposed. If this is found, the seat belt should be inspected as described below to determine it replacement is necessary.
If the seat belt is not damaged, the sleeve should be sewn in place according to the instructions in this bulletin.
NOTE:
It is important that the sleeve be sewn correctly. If the repair is being performed by an outside upholsterer, provide the instructions in this bulletin.
SEAT BELT INSPECTION PROCEDURE
1. Slide the sleeve down to expose the fuse portion of the seat belt.
2. Inspect the area for frayed or broken stitching (See Figure 1).
3. If stitching is damaged, seat belt replacement is necessary. If the stitching is not damaged, the seat belt caution label cover should be stitched in place.
NOTE:
If the seat belt was damaged as result of an accident, the replacement is not a warrantable item.
SLEEVE SEWING PROCEDURE
1. Fold the seat belt fuse over the caution label as shown.
2. Slide the sleeve over the seat belt fuse.
3. Sew the sleeve in place as shown (Figure 3).
NOTE:
The sleeve should be sewn above the seat.
WARRANTY INFORMATION
(Applies To Vehicles Covered Under Normal Warranty)
Warranty Type: A
Customer Comment Code: 87
Damage Code: 99
Part Number Main Cause: RX-7 FD01 57 630E 00, FD01 57 630E 17, FD01 57 630E 33
MX-5 NA01 57 630D 00, NA01 57 630D 17, NA01 57 630D 88
Operation Number: XX0619RX
Labor Hours: 0.3 Hrs.