Suspension, Power Door Lock, - Manual Update
Bulletin No.: 001/94Issued: 3/7/94
Revised
Category
W
Applicable Model/s
1994 323/Prot.
Subject:
WORKSHOP MANUAL CORRECTIONS
DESCRIPTION
Included are replacement pages for 1994 323/Protege Workshop Manual which require correction for the following reasons:
Page J1-2 - Correct Lubrication Requirements
Page J1-3 - Correct Lubrication Requirements
Page J1-7 - Correct Lubrication Requirements
Page J2-2 - Correct Lubrication Requirements
Page J2-3 - Correct Lubrication Requirements
Page J2-7 - Correct Lubrication Requirements
Page J2-9 - Change To SSTs Listed
Page R-2 - List Steering Axis Inclination (SAI)
Page R-4 - List Steering Axis Inclination (SAI) And Camber Angle Note
Page R-7 - List Steering Axis Inclination (SAI) And Camber Angle Note
Page R-9 - Camber Angle Note
Page S-26 - Corrections To Door Switch Terminal Labeling
Page TD-12 - Correction To Technical Data
Page TD-13 - Correction To Technical Data
Page TD-19 - Correction To Technical Data
Please add the new pages as follows:
1. Replace the original page in the binder style workshop manual with the 3-hole drilled replacement page.
NOTE:
For additional replacement large size pages or correction pages for the small size manual, please call Helm, INC. at (800) 782-4356 Monday through Friday, 9am to 5pm (EST) or fax (313) 883-1041.
Please list the correction bulletin number (shown in the upper left-hand corner of this page), category and quantity required. We have a limited supply of replacement pages. Orders will be filled on a first-come, first-serve basis. Allow five working days for delivery.
Reproductions of the manual will be updated prior to printing. Manuals purchased from the current inventory at Helm, Inc. will be supplied with the applicable correction pages.