Front Main Bearing

Fig. 22, Removing Front Stationary Gear:

1. Remove the stationary gear and main bearing assembly from the front housing, using the puller and installer (49 0813 235), as shown in Fig. 22.
2. Using the main bearing replacer without adapter ring, press the main bearing out of the stationary gear.

Fig. 23, Removing and Installing Main Bearing:

3. Using the main bearing replacer with adapter ring, and aligning the tang of the bearing and the slot of the stationary gear, press fit the main bearing into the stationary gear until the adapter touches the stationary gear flange, Fig. 23.

Fig. 24, Installing Front Stationary Gear:

4. Press in the stationary gear to the front housing with the main bearing replacer, aligning the slot of the stationary gear flange and the dowel pin on the housing, as shown in Fig. 24.