Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Idle Speed/Throttle Actuator - Electronic >> Service and Repair >> Accelerated Warm Up System Solenoid Valve

Accelerated Warm Up System Solenoid Valve




Removal/Installation
1. Disconnect negative battery cable.
2. Remove the extension manifold.
3. Disconnect the solenoid valve connector.
4. Remove the accelerated warm up system (AWS) solenoid valve as shown in the figure.
5. Install in the reverse order of removal.
pro multis · About Operation CHARM