With Self-Diagnosis Checker and System Selector

After-Repair Procedure
Clear diagnostic trouble code (DTC) numbers by disconnecting the negative battery cable for 20 sec. and depress the brake pedal. Reconnect the negative battery cable.

Self-Diagnosis Checker
1. Connect the SST (System Selector) to the data link connector.




2. Set system select to position 1.
3. Set the test switch to SELF TEST.




4. Connect the SST (Self-Diagnosis Checker) to the System Selector and a ground.
5. Set the select switch of the Self-Diagnosis Checker to position A.
6. Turn the ignition switch ON.
7. Verify that no trouble code numbers are displayed.