Fuel Pump: Service and Repair

Disassembly/Assembly

WARNING:
- When replacing the fuel system parts, keep sparks, cigarettes, and open flames away from the fuel.
- Fuel line spills and leaks are dangerous. Fuel can Ignite and cause serious Injuries or death and damage.
- Fuel can also Irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures."

1. Disassemble in the order shown in the figure.
2. Assemble in the reverse order of disassembly, referring to Assembly Note.




1. Fuel pump connector
2. Bracket
3. Mounting rubber
4. Fuel pump
5. 0-ring
6. Seal rubber
7. Fuel filter (Low pressure side)




Assembly Note
After installing the fuel pump to the bracket, pull the pump down so that it is tight against the bracket.