Fuel Delivery and Air Induction: Service and Repair

Exploded Diagram Of Intake Air System
1. Fresh air duct
2. Accelerator cable
3. Air intake hose
4. Air cleaner housing
5. Air bypass valve
6. Pressure chamber
7. Air intake pipe
8. Water hose
9. Connector
10. Vacuum hose
11. Throttle body
12. Extension manifold
13. Fuel hose
14. Connector
15. Vacuum hose
16. Intake manifold
17. Idle air control valve
18. Solenoid valve-accelerated warm up system (AWS)
19. Charge air cooler

Removal/Inspection/Installation
1. Remove in the order shown in the figure and refer to Removal Note.
2. Inspect all parts and repair or replace as necessary.
3. Install in the reverse order of removal and refer to Installation Note.





Removal Note
1. Loosen the drain plug and radiator cap and drain the coolant from radiator.
2. Remove the water hose from the throttle body.
3. After installation of the throttle body, refill the radiator.




Installation Note
Install the air intake hose clamp and hose same place as shown in the figure.