Fuel Temperature Sensor: Testing and Inspection

Removal/Installation

WARNING: Fuel line spills and leaks can be dangerous. Fuel can ignite and cause serious injuries or death and can damage the vehicle. Fuel can also irritate skin and eyes. To prevent this from happening, release the fuel pressure according to "Fuel Line Safety Procedures."

1. Remove the intake air system component parts.




2. Disconnect the fuel thermosensor connector.
3. Remove the fuel thermosensor.
4. Install in the reverse order of removal.

Tightening Torque: 20-24 Nm (15-18 ft.lb.)

Inspection




1. Place the fuel thermosensor in water with a thermometer and heat the water gradually.




2. Measure the resistance of the sensor with an ohmmeter.
3. Replace the sensor, if necessary.