Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Testing and Inspection >> Vehicle Speed Sensor-Revolution Sensor (Output Shaft)

Vehicle Speed Sensor-Revolution Sensor (Output Shaft)


Inspection
1. Disconnect the negative battery cable.




2. Disconnect vehicle speed sensor (revolution sensor) connector.







3. Measure the resistance between the terminals of the vehicle speed sensor (revolution sensor).




4. If not correct, replace the vehicle speed sensor (revolution sensor).
5. Connect the vehicle speed sensor (revolution sensor) connector.
6. Connect the negative battery cable.




Troubleshooting Tip

pro multis · About Operation CHARM