Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Service and Repair >> Vehicle Speed Pulse Generator (Input Turbine Shaft)

Vehicle Speed Pulse Generator (Input Turbine Shaft)

Replacement
1. Remove the transmission assembly.




2. Remove the vehicle speed pulse generator from the transmission case.
3. Apply ATF to a new 0-ring and install it on the new vehicle speed pulse generator.
4. Install the new gasket and new vehicle speed pulse generator.
5. Install new bolts and tighten.

Tightening Torque: 5.0-6.8 Nm (44-60 in.lb.)

6. Install the transmission assembly.

pro multis · About Operation CHARM