Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Testing and Inspection >> Vehicle Speed Pulse Generator (Input Turbine Shaft)

Vehicle Speed Pulse Generator (Input Turbine Shaft)

Inspection
1. Disconnect the negative battery cable.




2. Disconnect the vehicle speed pulse generator connector.

Resistance @ 20-80 Deg. C (68-176 Deg. F):




3. Measure the resistance between the terminals of the vehicle speed pulse generator.




4. If not correct, replace the vehicle speed pulse generator.
5. Connect the vehicle speed pulse generator connector.
6. Connect the negative battery cable.




Troubleshooting Tip


pro multis · About Operation CHARM