Operation CHARM: Car repair manuals for everyone.

Reading Diagnostic Trouble Codes

INSPECTION




- Connect the SSTs (NGS) to the data link connector-2.
- Refer to the manufacturer-provided instruction manual for the NGS operation.
- Select "DIAGNOSTIC TEST MODE function and press trigger.
- When "NO CODES RECEIVED/SYSTEM PASSED" is displayed, all systems monitored are judged OK.
- When any of the diagnostic trouble codes is displayed, carry out troubleshooting according to the code.
- If "LINK MONITOR ERROR" is displayed, check connection of the NGS.
- After all problems have been repaired, carry out "After Repair Procedure."