Displaying & Reading Trouble Codes

SST





ASSEMBLY OF SST





DIAGNOSTIC TROUBLE CODE
- Connect the SST (NGS) to the data link connector 2 and battery.
- Turn the ignition switch ON.
- Check the diagnostic trouble code(s), referring to the SST (NGS) instruction manual.
- If a diagnostic trouble code(s) is displayed, check for the cause by using the number on the diagnostic trouble code table. (Repair as necessary.)
- Following repairs is made, do the After-Repair procedure to verify that there are no remaining codes.

TROUBLESHOOTING
If a diagnostic trouble code is shown on the SST, check for the cause by using the chart related to the code shown.





DIAGNOSTIC TROUBLE CODE CHART