With Automatic Transaxle (ATX)

SYSTEM INSPECTION
1. Warm up the engine to normal operating temperature and let it idle




2. Connect the Special Service Tools (SST)s New Generation Star (NGS) tester to the data link connector-2.
3. Select the "PID/DATA MONITOR AND RECORD" function on the NGS display. Confirm that the transaxles in P position.
4. Select the engine revolution and fuel injector on the NGS display.
5. Increase the engine speed to 3,000 rpm, then suddenly release the throttle.
6. Verify that the fuel injection duration is 0 msec while the engine speed is above approx. 2,500 rpm on deceleration.