Operation CHARM: Car repair manuals for everyone.

With Manual Transaxle (MTX)

Distributor R & R FS (MTX):




REMOVAL / INSTALLATION
1. High-tension lead
2. Connector
3. Distributor

INSTALLATION NOTE
1. Verify that the No.1 cylinder is at top dead center and the distributor matching marks are aligned.

Installation Note FS:




2. Install the distributor and connect the high-tension leads and distributor connector.
3. Tighten the locknut or bolts to the specified torque.

Tightening torque: 19-25 Nm (14-18 ft.lbs.)