Operation CHARM: Car repair manuals for everyone.

With Manual Transaxle

ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

NOTE: The engine coolant temperature sensor is at the rear of the engine.

ECT Connection:




1. Disconnect the engine coolant temperature sensor connector.
2. Remove the engine coolant temperature sensor.

ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION




1. Install a new washer and the engine coolant temperature sensor.

Tightening torque 25-29 Nm (19-21 ft. lbs.)

2. Connect the engine coolant temperature sensor connector.
3. Start the engine and check for coolant leakage.