Manual Transaxle
ENGINE COOLANT TEMPERATURE SENSOR REMOVALNOTE: The engine coolant temperature sensor is at the rear of the engine.
ECT Connection:
1. Disconnect the engine coolant temperature sensor connector.
2. Remove the engine coolant temperature sensor.
ENGINE COOLANT TEMPERATURE SENSOR INSPECTION
1. Place the sensor in water with a thermometer and heat the water gradually.
ECT Testing:
2. Measure the resistance of the sensor.
3. If not as specified, replace the engine coolant temperature sensor.
ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
1. Install a new washer and the engine coolant temperature sensor.
Tightening torque 25-29 Nm (19-21 ft. lbs.)
2. Connect the engine coolant temperature sensor connector.
3. Start the engine and check for coolant leakage.