Transaxle Solenoid and Sensors Resistance Tests
TRANSAXLE SOLENOID AND SENSORS RESISTANCE TESTS SOLENOIDS (EPC, SS1, SS2, TCC, 3-2T/CCS)1. Set an ohmmeter to the 0-1OO ohm range.
2. Connect the position lead of the ohmmeter to the appropriate VPWR jack for the solenoid being tested.
3. Connect the negative lead of the ohmmeter to the appropriate solenoid (EPC, SS1, SS2, TCC, 3-2T/CCS) jack.
4. Record the resistance.
5. Refer to the chart for the valves.
6. If out of range refer to the following pinpoint tests.
^ Pinpoint test E (EPC)
^ Pinpoint test A (SS1, SS2)
^ Pinpoint test C (TCC)
^ Pinpoint test G (3-2T/CCS)